Zenith R49W36 - Manual (Page 36)

P A G E 3 6 206-03865
Twin Picture splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
Twin picture mode is not available if you set lock “On” in Lock menu.
Use the PIP INPUT button to select the input source for the sub picture.
Each time you press PIP INPUT, you toggle between TV, VIDEO 1, VIDEO 2,
and VIDEO 3.
1
2
Press the Swap button.
Each time you press SWAP, you switch the PIP and Main screen channels.
Press the PIP button on the remote control in POP mode to activate twin picture mode.
Select the TV option on the PIP Source menu or with the PIP INPUT button. Use the
PIPCH-/PIPCH+ button to select the desired channel for the sub picture. Changing pro-
grams for the sub picture is only possible when the 'TV' option is selected as PIP source
(NTSC RF signal).
Press the EXIT button to exit twin picture mode.
Main Picture Sub Picture
Twin Picture
Watching Twin Picture
Swapping Screen
Selecting an Input Signal Source for Sub Picture