Yamaha RX-V359 - Manual (Page 29)

25
PLAYBACK
BA
S
IC
OPE
R
A
T
IO
N
English
■ Listening with headphones using
SILENT CINEMA
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
activates automatically whenever you connect headphones
to the PHONES jack while listening to CINEMA DSP or
HiFi DSP sound field programs (see page 31). When
activated, the SILENT CINEMA indicator lights up in the
front panel display.
• SILENT CINEMA does not activate when the component
connected to the MULTI CH INPUT jacks is selected as the
input source.
• SILENT CINEMA is not effective when “2CH STEREO” (see
page 31) is selected or when this unit is in the “STRAIGHT”
mode (see page 33).
• The sound from the LFE channel will be mixed and output from
the headphones.
■ Muting the audio output
Press MUTE on the remote control to mute the
audio output.
Press MUTE again to resume the audio output.
y
• You can also rotate VOLUME on the front panel or VOLUME
+/– on the remote control to resume the audio output.
• You can adjust the muting level by using “AUDIO MUTE” in
“OPTION MENU” (see page 56).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
If you change the input source or the sound field program while
the audio output is being muted, this unit resumes the audio
output.
■ Selecting the MULTI CH INPUT
component as the input source
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 16) as the input
source.
Press MULTI CH INPUT on the front panel (or
MULTI CH IN on the remote control) so that
“MULTI CH INPUT” appears in the front panel
display.
When “MULTI CH INPUT” is shown in the front panel display,
no other source can be played. To select another input source with
INPUT l / h on the front panel (or one of the input selector
buttons on the remote control), press MULTI CH INPUT (or
MULTI CH IN on the remote control) so that “MULTI CH
INPUT” disappears from the front panel display.
■ Using the night listening mode
The night listening mode is designed to improve
listenability at lower volumes or at night.
Press AMP on the remote control and then press
NIGHT to select “NIGHT ON”.
y
When a night listening mode is selected, the NIGHT indicator
lights up in the front panel display.
• You can use the night listening mode with any of the sound field
programs.
• The night listening mode may vary in effectiveness depending
on the input source and the surround sound settings you use.
Additional operations
Notes
Note
MUTE
Note
Notes
MULTI CH INPUT
MULTI CH IN
Front panel Remote control
or
+10
NIGHT
AMP