Yamaha HTR-5790 - Manual (Page 8)

CONTROLS AND FUNCTIONS
4
1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote control.
2 Remote control sensor
Receives signals from the remote control.
3 Front panel display
Shows information about the operational status of this
unit.
4 PRESET/TUNING EDIT
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and tuning.
5 FM/AM
Switches the reception band between FM and AM.
6 A/B/C/D/E
Selects one of the 5 preset station groups (A to E).
7 PRESET/TUNING l / h
Selects preset station number 1 to 8 when the colon (:) is
displayed next to the band indication in the front panel
display.
Selects the tuning frequency when the colon (:) is not
displayed.
8 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
9 TUNING MODE (AUTO/MAN’L MONO)
Switches the tuning mode between automatic (“AUTO”
indicator on) and manual (“AUTO” indicator off).
0 VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
A OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 24).
CONTROLS AND FUNCTIONS
Front panel
PRESET/TUNING
EDIT
FM/AM A/B/C/D/E PRESET/TUNING
INPUT MODE TONE CONTROL MULTI CH
INPUT
STRAIGHT
EFFECT
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
VOLUME
PROGRAM INPUT
STANDBY
/ON
OPTIMIZER
MIC
PHONES
SILENT CINEMA
SPEAKERS
A B
OPTICAL R AUDIO L VIDEO S VIDEO
VIDEO AUX
(U.S.A. model)
Note
00_HTR-5790U_EN.book Page 4 Tuesday, December 9, 2003 9:16 AM