ZyXEL Communications Omni 56K II - Manual (Page 53)

Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets 5-7
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
&N90 V.90 40000
&N89 V.90 41333
&N88 V.90 42666
&N87 V.90 44000
&N86 V.90 45333
&N85 V.90 46666
&N84 V.90 48000
&N83 V.90 49333
&N82 V.90 50666
&N81 V.90 52000
&N80 V.90 53333
&N79 V.90 54666
&N78 V.90 56000
Pulse dial make/break ratio. S23.2
&P0 * make / break=39% / 61%
&Pn
&P1 make / break=33% / 67%
RTS (Request To Send) function selection. S21.5
&R0 CTS tracks RTS, response delay is set in S26.
&Rn
&R1 * Ignore RTS, assumes RTS is always ON.
Data Set Ready (DSR) function selection. S21.3
&S0 * DSR overridden, DSR is always ON.
&Sn
&S1 DSR according to CCITT (ITU-TSS). (See also
S41.5, S44.4)
Modem testing. S16
&T0 Terminate the test in progress.
&T1 Initiate an Analog Loop-back (ALB) test.
&Tn
&T3 Initiate a Local Digital Loop-back (LDL) test.