Zanussi ZCE 8021 - Manual (Page 11)

11
KEY
A ANGLED TIMER DISPLAY
B FUNCTION NEONS
C VERTICAL TIMER CONTROLS
D DECREASE CONTROL
E
COUNTDOWN
F COOK TIME
G END TIME
H INCREASE CONTROL
NOTE:
The time of day must be set before the oven will
operate manually.
1. HOW TO SET THE TIME OF DAY
The oven has a 24 hour clock.
When the electricity supply is first switched ON, the
display will flash as Fig. 12.00.
To set the correct time press the increase control
button ( + ) and if necessary, the decrease control
button ( - ) until the correct time on the 24 hour
clock is reached, e.g. 10.00am as Fig.1.
Note: The increase and decrease control buttons
operate slowly at first, and then more rapidly.
They should be pressed separately.
2. HOW TO SET THE COUNTDOWN
The 'Countdown' gives an audible reminder at the
end of any period of cooking. This cooking period
may be up to 19 hrs 59 mins. It is not part of the
automatic control.
To set, press the 'Countdown' button ( ). The
'Countdown' indicator neon will illuminate and the
display will read 0.00 as Fig. 2.
To set, press the correct time duration depress the
increase control ( + ) until the display indicates the
interval to be timed, e.g. 1 hr 45mins as Fig.3. If
necessary depress the decrease control ( - ) to
achieve the correct time interval.
NOTE: This must be completed within 5 seconds
of first pressing the 'Countdown' button.
The display will return to the time of day and the
'Countdown' indicator will be illuminated.
During the operation of the 'Countdown', you can
check the remaining time period by pressing the
'Countdown' button ( ).
The 'Countdown' will sound intermittently for up to 2
minutes at the end of the timed period. The sound
can be stopped by pressing any button.
ELECTRONIC TIMER
Fig. 1.
Fig. 2.
Fig. 3.
A
B
C
D E F G H