Yamaha CRW8824SX Series - Manual (Page 10)

24X: 3,600 KB/sec Setup Flowchart
These flowcharts show the procedure for setting up the CRW8824SX drive. For
easy cross-referencing, the relevant pages in this manual are also given.
Windows Users
STEP
1
STEP
1-1
STEP
1-2
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
YES
NO
Do you have a SCSI adapter
card?
Check that the SCSI adapter
card is recognized correctly
Set up the CRW8824SX drive
Install the CD writing software
Check that the CRW8824SX drive
is recognized correctly (P.20)
Obtain a SCSI adapter card
Install the SCSI adapter card
Recommended models:
Adaptec AHA-2940-series (PCI)
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter card is
recognized correctly by the computer’s OS.
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM
to check that the drive is recognized
correctly by the computer’s OS.
For details about how to install the
software, refer to the documentation that
came with it.
Start using the CRW8824SX
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
1. Set the switches at the rear of the drive.
(P.10, 11)
2. Connect the SCSI and power cables,
then switch the drive on. (P.16-18)
1