Zanussi 200340 - Manual

ZANUSSI
P R O F E S S I O N A L
GAS FRYERS - 23 LT
N 900
Model 200340
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1 1
REAR FLUE UPSTAND FOR SMALL CHIMNEY 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
2 HALF SIZE BASKETS FOR HD FRYERS 1 2 1
INCLUDED ACCESSORIES
Net weight - kg. 57 115 65
gas 20 40 19
Power - kW
Maximum Well Capacity -lt 21, 23 21, 23 21, 23
Thermocople safety valve l l l
height 575 575 365
depth 400 400 400
width 340 340 350
Usable well dimensions - mm
N° of wells 1 2 1
height adjustment 50 50 50
height 850 850 1200
depth 900 900 900
width 400 800 400
External dimensions - mm
Power supply Gas Gas Gas
NFRG420
200340
NFRG820
200341
NFRG401
200361
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 23 litres fryers in gas version.
The model 200361 is a gas tube
fryer particulary recommended for
the floured product.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
�
Burners with optimized
combustion, flame failure device and
protected pilot light.
�
Working temperature from 120ºC
to 190ºC.
�
Appliances are supplied for use
with natural gas, with LPG
conversion jets supplied as standard.
�
All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
�
Additonal overheat safety
thermostat.
�
Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
�
Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
�
The units are supplied, as
standard, with 2 half baskets for
each well.
�
Feet in stainless steel 50 mm
adjustables in height.
�
The special design of the control
knob system guarantees against
water infiltration.
�
Door with handles in stainless
steel.
� All models can be installed on
cantilever system.
�
Main connections can be via the
base of the unit.
�
All models provided with service
duct to facilitate installation.