ZyXEL Communications P-2602H - Manual (Page 74)

Chapter 4 VoIP Wizard And Example
P-2602H(W)(L)-DxA User’s Guide
74
4 Your ZyXEL Device will attempt to register your SIP account with your VoIP service
provider. When your account is registered your PHONE 1 light will come on and you
are ready to make and receive VoIP phone calls.
Figure 35 SIP Registration Test
5 This screen displays if SIP account registration fails. If your DSL cable was
disconnected, you can try connecting it. Then wait a few seconds and click Register
Again. If your Internet connection was already working, you can click Back and try re-
entering your SIP account settings.
Figure 36 VoIP Wizard Fail
6 This screen displays if your SIP account registration was successful. Click Return to
Wizard Main Page if you want to use another configuration wizard. Click Go to
Advanced Setup page or Finish to close the wizard and go to the main web
configurator screens.
Back Click Back to return to the previous screen.
Apply Click Apply to complete the wizard setup and save your configuration.
Exit Click Exit to close the wizard without saving your settings.
Table 15 VoIP Wizard Configuration
LABEL DESCRIPTION