Yamaha CD Recordable/Rewritable Drive CRW-F1SX - Manual (Page 34)

Loading/Ejecting a Disc
25
Manually Ejecting a Disc
If the disc tray fails to open for some reason, such as a power failure, follow the
steps below to remove the disc from the drive.
Frequent use of this operation may cause malfunction of the drive.
1
Prepare a thin pin-like object, such as a straightened paper
clip.
Use an object less than 2 mm in diameter and more than 3 cm in length.
2
Turn off the CRW-F1SX drive.
3
Insert the thin pin-like object straight into the manual eject
hole, and push it in.
When the disc tray opens, remove the disc.
4
Turn on the CRW-F1SX drive, and close the disc tray.
Note
Manual eject hole