ZyXEL Communications ES-1124 - Manual (Page 27)

Dimension ES-1124 Ethernet Switch
Product Specifications A
Product Specifications
This section provides the specifications of the switch.
PRODUCT SPECIFICATIONS
General
Standards
IEEE802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
IEEE802.3ab 1000BASE-T
IEEE802.3z Gigabit fiber
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control
Uplink Interface
2 1000Base-T RJ-45 connectors
2 mini-GBIC ports (shared with 1000Base-T)
Interface
24 10/100M Ethernet Ports
Auto-crossover
Compliant with IEEE 802.3/3u
Back pressure flow control for half duplex
Flow control for full duplex (IEEE 802.3x)
Connector: RJ-45
Data Transfer Rate
Ethernet: 10Mbps(half duplex)
20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex)
200Mbps(full duplex)
Network Cables
10BASE-T: UTP Cat.3, 4, 5 (100 m) EIA/TIA-586 100-ohm STP
(100 m)
100BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm
STP (100 m max.)
1000BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm
STP (100 m max.)
Full/Half Duplex Full/Half duplex for 10/100Mbps speeds
Media Interface
Exchange
All ports support auto-crossover
Performance and Management
Back plane
Non-Blocking full wire speed forwarding rate 8.8Gbps
Packet Forwarding
Rate 14880PPS for 10BASE-T
148800PPS for 100BASE-TX
Switching Method Store-and-forward
MAC Address Table 8K Mac with Auto Learning