Yamaha CLP-990M EN - Manual (Page 86)

86
CLP-990
MIDI [MIDI SETTING]
This parameter enables you to specify which MIDI
data the Clavinova can transmit.
See the procedure on page 72.
Type of data:
Note, Control, Program, Pitch Bend, SystemRealTime,
SysEx (System Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
You can save current song data on the Clavinova as
MIDI bulk data by transferring it to a connected MIDI
data filer (such as an MDF3) or a sequencer. To play
back the saved song data, send the bulk data back from
the storage device to the Clavinova and follow the
usual playback procedure.
You can interrupt song data bulk dump transmission
by pressing the B [– (NO)] button.
See the procedure on page 72.
You can transmit the panel data, such as voice selec-
tion, to a connected sequencer. Before you record per-
formance data to a connected MDF3 or sequencer, it is
useful if you first send and record (at the beginning of
the performance data) the panel setup data for your
performance during playback.
See the procedure on page 72.
You can transmit the voice data specified in the “Voice
Setting” menu (page 78) as MIDI bulk data. You can
interrupt voice data bulk dump transmission by press-
ing the B [– (NO)] button.
See the procedure on page 72.
Selecting a type of data transmit-
ted via MIDI [TransmitParameter]
Executing song data bulk dump
[SongBulkDump]
A B
C D
NO YES
Select a type of data. Select On or Off.
A B
C D
NO YES
Transmitting the initial settings
on the panel [InitialSetup]
Executing voice data bulk dump
[VoiceBulkDump]
A B
C D
NO YES
A B
C D
NO YES