Zanussi BMF 849 - Manual (Page 3)

3
The following symbols will be found in the text to guide you
throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
F
Contents
For the User For the Installer
Description of the Oven
Push-Pull control knobs (BMF
849)
Some models are provided with push-pull control knobs
(Fig. 1). These knobs can be completely sunken inside
the control panel when the oven is not working.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The Cooling Fan for the Controls
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
Fig. 1 FO0350
Guide to Use the instructions
Important Safety Information 2
Guide to Use the instructions 3
Description of the Oven 3
When the oven is first installed 5
Using the Oven 5
Electronic programmer 6
Using the oven 8
Cooking Tables 9
Cleaning and maintenance 11
Technical Assistance 13
Something not working... 13
Technical Data 14
Installation 14
Electrical connection 15