Yamaha DSP-A3090 - Manual (Page 36)

32
METHOD OF CHANGING SELECTIONS
The use of the remote control unit is recommended for simple
operation. Operations should be made watching information on this
unit’s display panel or the monitor screen.
1. Turn the power of this unit on. (If you want to display information
on the monitor, turn the power of the monitor on.)
2. Set the PARAMETER/SET MENU switch to the SET MENU
position on the remote control unit.
3. Press ▼ ▼ once so that “1. SPEAKER SET” lights up on the display.
4. Press “+” or “–” once.
5. Press ▼ ▼ (or ▲ ▲ ) once or more until the title of function on which
you will change the selection appears on the display.
6. Press “+” or “–” once or more so that the arrow points the
position you will select.
7. Repeat step 5 and 6 to change selections on other functions
in the same way.
NOTE: The same operations can also be made on the front panel.
First press the SET MENU switch and then INPUT TRIM control.
Select the title of function by pressing the SET MENU switch, and
change the choice by pressing the INPUT TRIM control.
Front panel Remote control
Remote control
POWER POWER
or
PARAMETER
SET MENU
Remote control
Remote control
Remote control
Remote control