Xantrex Technology PV-30208 - Manual (Page 20)

PV-30208 Photovoltaic Inverter
Operation and Maintenance Manual
Copyright 2003, Xantrex Technology
DOCUMENT: 151315 4-5
SECTION 4
OPERATION
OPERATOR INTERFACE
The PV-30208 is equipped with an Liquid Crystal Display. The display consists of 4 text lines contain-
ing the following information:
• Line 1: System Status - The current operating state of the inverter.
• Line 2: DC Current or Fault Descriptions - This line reports the DC current (amps). If the PV-
30208 is faulted, this line will report a description of the fault condition.
• Line 3: Bus Voltage or Fault Code - This line reports the Bus Voltage, in volts. If the PV-30208
is faulted, this line will report a code for the fault condition.
• Line 4: Inverter Output Power or Countdown Timer - During normal operation, this line will
report the inverter real time output power. During initialization or start-up, this line displays the
countdown timer.
The on/off switch is used to enable or disable system operation. The on/off switch is also used to reset
the inverter and clear any system faults.
The following is a typical display of the LCD during the six main operating states and an on/off switch.
Initializing System Wake Up Test
System Starting Power Tracking