Yamaha CDX-396 - Manual (Page 25)

English
E-
21
This unit can automatically synchronize a tape deck’s recording with CD play. With this function, you can record a CD on tape
easily and precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual
to find out whether it is compatible or not.)
*
This unit and the tape deck must be placed close to each other so that both of them can simultaneously receive the signals from this unit’s
remote control.
CD SYNCHRONIZED RECORDING
1
Press OPEN/CLOSE to open the disc tray, and load
a disc.
2
Load a tape on the tape deck.
*
The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (Refer to
page 20.)
3
Press SYNCHRO.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
*
In this state, the time display on this unit flashes on and off.
If necessary, select a desired track by pressing a numeric
button or
/ ( SKIP/SEARCH ).
4
Press .
Both CD play and tape deck recording begin.
*
CD play begins shortly after the recording.
5
If you want to stop recording temporarily and restart
recording from a desired track, stop this unit by
pressing
, and the tape deck as well, then follow
steps 3–4 again.
To cancel synchronized CD-tape recording
function
Press .
Notes
● To finish or stop the recording, make proper operations on the
tape deck. (For details, please refer to the owner’s manual of
the tape deck.)
● Programmed sequence of tracks can also be recorded with this
function instead of recording an entire disc. (Refer to pages
14–15 for the programming procedure.)
● This function can also be used together with the automatic
tape-programming function. (Refer to pages 16–19.)
OPEN/
CLOSE DIMMER SYNCHRO
PEAK SPACE
PROG CLEAR TAPE
3 2 1
6 5 4
9 8 7
INDEX + I0 0
TEXT/
TIME
RANDOM REPEAT 3
3
1
3
4
OPEN/
CLOSE
SYNCHRO
5
or