Yamaha CDC-635 - Manual (Page 4)

CONNECTIONS
● Before making any connections, switch OFF the power to
the unit and the amplifier or other component.
● Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
● Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
● If the placement of this unit causes noise to other
equipment, such as a tuner, separate them from each other.
4
To AC outlet
This unit
Amplifier
Connection cord (included)