Zephyr ZSA-M90AS - Manual (Page 5)

5. Fasten screws to wall (see below) as
marked.
6. Hang hood onto screws and hang tighten
(fig. A). 5. Fasten screws to wall (see below) as
marked.
6. Hang hood onto screws and hang tighten
(fig. A).
Note: Whenever possible, the hood should
be secured to wood studs celling and/or wall
with minimum thickness 3/8 .
,,
ZSA-M90AS Z0F-C022 2
ZSV-M90AS Z0F-C022 2
ZSA-E30AS Z0F-C022 2
ZSV-E30AS Z0F-C022 2
Model:ZSA/ZSV Page 4 Model:ZSA/ZSV Page 5