ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 244)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 243
<port-num> Removes all learned MAC address on the
specified port(s).
no logging Disables syslog logging.
ping
<IP|host-
name>
Sends Ping request to an Ethernet
device.
[vlan <vlan-id>][..] Sends Ping request to an Ethernet device
in the specified VLAN(s).
reload config <index> Restarts the system and use the specified
configuration file.
show classifier Displays all classifier related information.
[name] Displays the specified classifier related
information.
cluster Displays cluster management status.
candidates Displays cluster candidate information.
member Displays the MAC address of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
member mac <mac-
addr>
Displays the status of the cluster
member(s).
dhcp relay Displays DHCP relay settings.
server Displays DHCP server settings.
server <vlnd-id> Displays DHCP server settings in a
specified VLAN.
diffserv Displays general DiffServ settings.
garp Displays GARP information.
hardware-monitor <C|F> Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
https Displays the HTTPS information.
certificate Displays the HTTPS certificates.
key <rsa|dsa> Displays the HTTPS key.
session Displays current HTTPS session(s).
timeout Displays the HTTPS session timeout.
igmp-filtering profile [name] Displays IGMP filtering profile settings.
igmp-snooping Displays global IGMP snooping settings.
interface <port-
number>
Displays current interface status.
interfaces config
<port-list>
Displays current interface configuration.
Table 94 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION