ZyXEL Communications VES-1000 - Manual (Page 134)

VES-1000 Series Ethernet Switch
13-14 Switch-Related Commands
Use this command to show NDIS-level (Network Driver Interface Specification, a network interface card
specification) counters.
Figure 13-19 Display Switch Driver Counters
Table 13-H Display Switch Driver Counters
FIELD DESCRIPTION
TxPktCnt This is the number of transmitted packets.
RxPktCnt This is the number of received packets.
TxBufFullCnt This is the number of buffer allocation failures while transmitting packets.
RxNoBufCnt This is the number of buffer allocation failures while receiving packets.
TxFreeCnt This is the number of free buffers after packet transmission.
13.8.2 Switch Driver Clear Counters Command
switch driver count clear
Use this command to clear all NDIS-level (Network Driver Interface Specification, a network interface card
specification) counters.
ves-100> switch driver count disp
TxPktCnt = 79287 RxPktCnt = 281259
TxBufFullCnt = 0 RxNoBufCnt = 0
TxFreeCnt = 79287