Zhone Technologies 6238-I2 User Manual
Page 76
76 6238 Wi-Fi Router with VOIP User’s Guide 6238-A2-ZB20-10
IP Addresses
Any access to the router can be controlled when Access Control Mode is enabled.
The IP addresses of allowed hosts can be added in the IP Address page under Access
Control.
On the Access Control – IP Address page, enter the IP addresses of the allowed
hosts by clicking the Add button.
The IP Address entry page will be displayed as below:
Add the IP address of the allowed host into the entry box.
Provide the proper subnet mask to specify the range of hosts within the IP address
subnet that are allowed to control this unit.
Click the Save/Apply button after the entry.
Note: It is recommended that the IP address and its associated subnet mask must be
added into this IP address list before the Access Control Mode is enabled. This
address list is used for both LAN and WAN control access to the unit.