Adjustments, Setting the clock 1, Listening with headphones – Yamaha EMX-220VCD User Manual

Page 22: E-14, Starting the operation of this unit adjustments, Changes, Version 2.0 / playback control, Soft normal max min, Echo

Advertising
background image

E-14

Setting the clock

1

While the power is on, press the DISPLAY button to
display the time. If this unit is in the standby mode, you
can proceed to the next step.

2

While holding the TIME ADJ button pressed, press the
HOUR button and set the hour.
*

Press the HOUR button once to advance the time by 1
hour. Press and hold to advance continuously.

3

While holding the TIME ADJ button pressed, press the
MIN button and set the minute.
*

Press the MIN button once to advance the time by 1
minute. Press and hold to advance continuously.

Singapore model uses a 24-hour display. For China and
General models, either the 24-hour display or the 12-
hour display [shown by “AM (PM) 12:00”] is selected
depending on the setting of the FREQUENCY STEP
switch on the rear panel, so you cannot select a desired
type freely.

In the event of a power failure or when the AC supply
lead is disconnected.
The time display will go out, however, the clock will function
for about 5 minutes without power supply. So you do not
have to reset the time if the AC power supply is resumed
within about 5 minutes.
When the AC power supply is resumed after more than 5
minutes pass without power supply, the time display will flash
on and off to indicate that the time must be reset.

1

2

3

Changes.

Changes.

DISPLAY

MEMORY

TIME ADJ

MEMORY

REPEAT

TIME

TIME ADJ

MODE

PTY SEEK

START

HOUR

MIN

REPEAT

TIME

MODE

PTY SEEK

START

HOUR

MIN

Listening with headphones

Be sure that your headphones have a 3.5 mm (1/8”)
diameter plug and are between 16 ohms and 50 ohms
impedance. Recommended impedance is 32 ohms.

When headphones are connected, the speakers are
defeated automatically and you can listen to the sound to
be output from the front speakers through headphones.
Adjust the VOLUME control for desired volume.

VIDEO CD CHANGER RECEIVER

VIDEO CD

Version 2.0 / Playback Control

PRESET/TUNING/BAND

A/B/C/D/E

OPEN/CLOSE

DISC

1

DISC

2

DISC

3

DISC

CHANGE

VOLUME

INPUT SELECTOR

VCR•LD/TV•VCD/CD•TAPE/MD•TUNER

VCD/CD

TUNER

MIC TONE

MIC

MIC MIXING

SOFT

NORMAL

MAX

MIN

STANDBY/ON

PHONES

KARAOKE

PROGRAM

ECHO

ECHO

MEMORY

MUSIC

DISPLAY

MEMORY

AUTO/MAN’L

REPEAT

TIME

TIME ADJ

TIMER

HOUR

MIN

INPUT TRIM

PHONES

STARTING THE OPERATION OF THIS UNIT

ADJUSTMENTS

Advertising