XM Satellite Radio R-672 User Manual
Page 52
ENGLISH
52
Continued
When selecting the DOLBY HEADPHONE
• You can select the desired listening mode for each Dolby Headphone mode.
Note: The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source
in a Dolby Headphone mode.
MOVIE : This provides the surround effect suitable for movie
sources.
MSC 1 (MUSIC 1) : This provides the surround effect suitable for
music sources.
MSC 2 (MUSIC 2) : This provides less surround effect compared
to MUSIC 1 mode.
1.
Press the CURSOR UP(
)/DOWN(
) buttons to select the “DOLBY HP”, then press the ENTER button.
2.
Press the CURSOR UP(
)/DOWN(
) buttons to select the desired Dolby Headphone mode.
3.
Press the CURSOR LEFT(
)/ RIGHT(
) buttons to select the desired listening mode.
• Each time the CURSOR UP(
) / DOWN(
) buttons are pressed,
“DH 1” (Dolby Headphone 1), “DH 2” or “DH 3” is selected.
4.
Repeat the above steps 2 and 3 to select the desired listening modes for other Dolby Headphone modes.