2 configuring a filter set – ZyXEL Communications Prestige 643 User Manual
Page 104
Prestige 643 ADSL Router
8-4
Filter
Configuration
8.2 Configuring a Filter Set
To configure a filter set, follow the procedure below.
Step 1. Enter 21 from the main menu to display Menu 21 – Filter Set Configuration.
Figure 8-3 Menu 21 - Filter Setup
Step 2. Enter the index number of the filter set (1-12) you wish to configure and press [ENTER].
Step 3. Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 4. Press [ENTER] at the message: “Press ENTER to Confirm…” to open Menu 21.1.1 - Filter
Rules Summary.
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 TELNET_WAN 9 _______________
4 PPPoE 10 _______________
5 FTP_WAN 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel: