ZyXEL Communications P-2000W V2 - Manual (Page 13)

P2000W V2 Troubleshooting Guide
All contents copyright (c) 2005 ZyXEL Communications Corporation.
3. Start packet sniffing software and start packet capturing.
4. Start P2000W V2 and make a complete call from registering to calling a
party until problem appears.
5. Stop capturing and save the captured packet in file.
Scenario B
1. Connect the hub between the P2000W V2 and the front end CPE with
Ethernet cable (Make sure P2000W V2 is with public IP).
2. Connect the PC with packet sniffer installed to the hub.
3. Start packet sniffing software and start packet capturing.
4. Start P2000W V2 and make a complete call from registering to calling a
party.
5. Stop capturing once call is established and voice can transferred both way
successfully.
6. Save the captured packet in file.