Yamaha NS-120 - Manual (Page 5)

English
5
SPECIFICATION
Type ..................................... 2-way bass reflex speaker system
(Magnetically-shielded type)
Driver ........................................................... 13 cm cone woofer
3 cm dome tweeter
Nominal Impedance ....................................................... 6 ohms
Frequency Response ........................................ 42 Hz – 35 kHz
Nominal Input Power ......................................................... 60 W
Maximum Input Power .................................................... 200 W
Sensitivity .......................................................... 88 dB/2.83 V/m
Crossover Frequency ....................................................... 3 kHz
Dimensions (W x H x D) ............................ 168 x 800 x 269 mm
Weight ............................................................................ 12.5 kg
Accessories ................................................................ Stand x 4
Screw (6 mm) x 4
Wood screw (4 mm) x 4
Pad x 4
Spike x 4
Nut x 4
● Specifications subject to change without notice due to
product improvements.
● Care should be taken not to exceed the input power values
noted above.
REMOVING THE FRONT COVER
The front cover is fastened to the enclosure at six points, and
can be removed if desired. To remove the cover, hold on to
both sides and slowly pull straight away from the speaker. To
reattach, line up the six pegs on the inside surface of the cover
with the six corresponding holes on the speaker and push
gently.
Note
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive force
with tools.