ZyXEL Communications NWD-490 - Manual (Page 9)

ZyXEL NWD-490 User Manual
8
10. If you are connecting to a network that has a
DHCP server, select Use server-assigned IP
address to have the DHCP server assign
TCP/IP information (such as IP address and
Subnet mask) to your NWD-490, otherwise,
select Use specific IP address and fill in the
IP address, Subnet mask and Default
gateway. Then tap on ok.
4. Configuring WLAN Utility
To connect to a wireless network, you must set the client device (PDA) with the SSID
as the Access Point (AP) or Router you want to connect to. You also need to
configure the security settings if the AP or Router already has one.
The NWD-490 supports WEP, WPA-PSK and WPA2-PSK for wireless network
security.
1. Tap on Start -> Settings page -> Connections tab -> Network Cards icon.