ZyXEL Communications ZyXEL ZyAIR G-2000 - Manual (Page 5)

ZyAIR G-2000 802.11g Wireless 4-port Router
5
2 Hardware Connections
2.1 Side Panel and Connections
LABEL DESCRIPTION AND FUNCTION
1. LAN Use an Ethernet cable to connect at least one computer for initial ZyAIR configuration.
These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover
(automatically adjust to the type of Ethernet cable you use (straight-through or
crossover)).
2. WAN Connect your cable/DSL modem to this port with the cable that came with your modem.
3. POWER
12V DC
Connect the end of the included power adaptor (use only this adaptor) to this power
socket.
After you’ve made the connections, connect the power cable to a power supply and look at the front panel
LEDs.
RESET You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the
ZyAIR to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc. see
your User’s Guide for details).