Zoom FIRE-36 User Manual
Page 7
Controls and Functions
7
ZOOM FIRE-36
◆
Patch section
This section lets you store and recall effect patches. It also serves to operate the built-in tuner and
noise reduction functions.
(1) [MANUAL] key
(2) [PROGRAM/BANK] key
This key switches between manual mode, where you use the controls on the front panel to shape
the sound, and program mode where you use settings stored in preprogrammed patches.
When the [MANUAL] key is ON (LED lit), the manual mode is selected. When the [PROGRAM/
BANK] key is ON (LED lit), the program mode is selected. (The default setting at power-on is
manual mode.)
(3) Display
Shows the number of the currently selected patch, or the value of setting parameters of the FIRE-36.
(4) [
Q
]/[
W
] keys
Serve to switch between patches and to adjust ZNR (ZOOM Noise Reduction).
(5) [STORE] key
Stores the current settings as a user patch.
(6) [EXIT] key
Cancels an operation and calls up the number of the currently selected patch onto the display.
(7) [TUNER] key
This key activates the built-in tuner of the FIRE-36.
(8) [ZNR] key
This key turns ZOOM Noise Reduction on or off. (ZNR is ON by default at power-on.)
(1)
(2)
(3)
(6)
(5)
(7)
(4)
(8)
FIRE36E.fm 7 ページ ２００４年６月２５日 金曜日 午前１１時１２分