Yamaha DM 1000 - Manual (Page 13)

Remote Channels
13
Studio Manager for DM1000—Owner’s Manual
Remote Channels
When the Remote Layer is selected, Remote Channels are displayed.
A Channel number
This is the channel number.
B SELECT button
This button is used to select the Remote Channel.
C ON button
This button turns the Remote Channel on and off. It appears
orange while the channel is on.
D Short channel name
This is the Remote Channel’s short name. To edit the name, click
it and type.
E Channel fader
This is the Remote Channel’s fader.
Note: When the remote target setting on the DM1000 is set to
User Defined, you can use the ON buttons and channel faders
to control the functions specified on the Remote pages. When the
remote target is set to anything other than User Defined, the ON
buttons and channel faders have no effect, and the name of the
specified target is displayed in the channel’s short name.
C
5
D
1
2