Technical specifications, Installation, Positioning – Zanussi ZUD 9124 User Manual

Page 15

Advertising
background image

15

TECHNICAL SPECIFICATIONS

Positioning

This appliance should only be installed at a location
where the ambient temperature corresponds to the
climate classification indicated on the rating plate,
which is located on the inside left of the appliance.

The following table shows which ambient temperature
is correct for each climate classification.

SN

+10°C to +32°C

ST

+18°C to +38°C

The appliance should be located in a dry atmosphere,
out of direct sunlight and away from continuous heat
and extreme temperature, e.g. not next to a boiler or
radiator, or in a very cold room e.g. an outhouse. If
these temperatures are exceeded i.e. warmer or cold-
er, then the appliance may not operate correctly.

For building-in and door reversal instructions please
refer to the relevant instructions on the following
pages.

INSTALLATION

DIMENSIONS

Height

81,5

cm

Width

59,6

cm

Depth

54

cm

POWER SUPPLY VOLTAGE AND FREQUENCY

220-240 V / 50 Hz

TOTAL POWER ABSORBED

80 W

AVERAGE DAILY UNITS ELECTRICITY(*)

0,58 kWh

TOTAL GROSS CAPACITY

122 l

NET CAPACITY

Fridge

102 l

NET CAPACITY

compartment

17 l

STAR RATING

(*)This figure is based on standard test results in accordance with European Standard EN153. Actual con-
sumption will depend on how the appliance is used and where it is located.

Advertising