Zanussi 531321 - Manual

ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
STANDARD NERT10 - HOT AIR BLOWER
533315
CONNECTION PLATE-HANDLING TO
WT90/RT10 2 2
INCLUDED ACCESSORIES
Supply voltage 400 V, 3N, 50 400 V, 3N, 50
Net weight - kg. 315 315
Noise level - dBA 70 70
installed-electric 36 36
Power - kW
boiler power - kW 16.5 16.5
boiler capacity - lt. 16 16
temperature - °C 80-90 80-90
Rinsing
pump power - kW 1.5 1.5
tank capacity - lt. 114 114
temperature - °C 55-65 55-65
1st wash
height/with open door 1744, 2050 1744, 2050
depth 824 824
width 2150 2150
External dimensions - mm
Air temperature - °C 60 - 65 60 - 65
Air emission - m³/h 500 500
Capacity dishes/h 1800 1800
N° of speeds 1 1
Feeding direction from RH to LH from LH to RH
Power supply Electric Electric
NERT10ERB
533314
NERT10ELB
533315
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The NERT range consists of 2 electric
models with one wash tank and one speed
with right or left-hand loading and a
maximum capacity of 100 baskets per hour.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Wash tank in 316 AISI stainless steel with
rounded corners, internal and external
surfaces in 304 AISI stainless steel. Wash
arms and jets in 304 AISI stainless steel to
ensure an excellent and reliable
performance. The double-skinned
counter-balanced inspection doors guarantee
solidity and strength.
� Wash Zone: all the soil is removed by the
combination of the mechanical washing
action that directs water at the washware by
means of a powerful 700 litres/minute pump
and the thermal action of the heating
elements that guarantee a constant water
temperature of between 55° and 65°C and to
which the appropriate detergents are added.
� Rinse Zone: clean water is used to
eliminate any trace of detergent from the
washware. There is a temperature control
device in the boiler that guarantees the
sanitization of the washware at a
temperature of no less than 85°C.
� Ease of Cleaning and Maintenance:
manually removable wash arms and tank
filters without the use of tools; water and
electrical connections are positioned centrally
on the front side of the machine to allow
installation directly against a wall.