ZyXEL Communications STB-1001S2 - Manual (Page 7)

ENGLISH
STB-1001S2
7
Turn the STB-1001S2 On
Once you have made the hardware connections, take the following steps to
start up the STB-1001S2.
1. Turn your television on. Change it to the channel or setting you normally
use to watch videos or DVDs. For example, select the “VIDEO” input
option, or press the “AV” button (look at the documentation that came with
your TV if you are not sure what to do).
2. Press the ON/OFF button on the rear of the STB-1001S2.
The light on the front of the STB-1001S2 lights up. It blinks while the
STB-1001S2 is starting up, then shines steadily green once the STB-
1001S2 is ready (this may take a little while).
The light on the front of the STB-1001S2 turns green once the STB-
1001S2 has finished starting up.
If the or lights do not behave as expected, first check the
STB-1001S2’s connections. Make sure that the power is on and
the Internet access device is working. If this does not help, restart
the STB-1001S2 (switch it off, then on using the ON/OFF switch
on the rear panel). If the problem persists, contact your vendor.
3. A start-up picture displays on the television. When the STB-1001S2 has
successfully started up, the Home menu displays. Your STB-1001S2 is
ready to use!