Yamaha GX-700 - Manual (Page 17)

English
E-9
DISC 1 DISC 2 DISC 3
3–DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK DOLBY B NR
DIRECTION
PROGRAM B.BOOST MUSIC INPUT INPUT
PHONES
MIN
PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E
DISC CHANGE OPEN / CLOSE
TREBLE BASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSE DOLBY NR
HOUR
FREQ PS/PTY/RT/CT RANDOM MODE– PTY SEEK– START REPEAT TIME
DISPLAY MODE
1
2
3
FREQ PS/PTY/RT/CT
RANDOM REPEAT
MODE–PTY
HOUR MIN
FREQ PS/PTY/RT/CT
RANDOM REPEAT
MODE–PTY
HOUR MIN
DISPLAY
MEMORY
TIME ADJ
MEMORY
TIME ADJ
1
While the power is on, press DISPLAY to display the time.
2
While holding TIME ADJ pressed, press HOUR and set the
hour.
* Press HOUR once to advance the time by 1 hour. Press
and hold to advance continuously.
3
While holding TIME ADJ pressed, press MIN and set the
minute.
* Press MIN once to advance the time by 1
minute. Press and hold to advance continuously.
* The hour setting will not advance even if minute is
advanced from “59” to “00”.
Note
In the event of a power failure or when the AC supply lead is
disconnected, the time display will go out, however, the clock
will function for about 5 minutes without any power supply.
Otherwise, the time display will flash on and off to indicate that
the time must be reset.
If desired, you can adjust the brightness of the display.
Press and hold DISPLAY for more than 2 seconds so that
“DIMMER
±
0” appears on the display.
While holding DISPLAY pressed, turn VOLUME clockwise to
increase or counterclockwise to decrease brightness.
Control range:
±
0 to –6 (Preset value:
±
0)
Setting the clock
DISC 1 DISC 2 DISC 3
DOWN UP
VOLUME
STANDBY/ON
PROGRAM B.BOOST MUSIC INPUT INPUT
MIN
PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E
DISC CHANGE OPEN / CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSE DOLBY NR
HOUR
FREQ PS/PTY/RT/CT
RANDOM MODE– PTY SEEK– START REPEAT TIME
DISPLAY MODE
Adjusting brightness of the display
Changes.
Changes.
Preparations and connections
VOLUME
DISPLAY