ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 73)

ES-4024A User’s Guide
72 Chapter 7 Basic Setting
Figure 30 General Setup
The following table describes the labels in this screen.
Table 9 General Setup
LABEL DESCRIPTION
System Name Choose a descriptive name for identification purposes. This name consists of up to
32 printable characters; spaces are allowed.
Location Enter the geographic location (up to 30 characters) of your switch.
Contact Person's
Name
Enter the name (up to 30 characters) of the person in charge of this switch.
Use Time Server
when Bootup
Enter the time service protocol that a timeserver sends when you turn on the switch.
Not all timeservers support all protocols, so you may have to use trial and error to
find a protocol that works. The main differences between them are the time format.
When you select the Daytime (RFC 867) format, the switch displays the day,
month, year and time with no time zone adjustment. When you use this format it is
recommended that you use a Daytime timeserver within your geographical time
zone.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868) .
None is the default value. Enter the time manually. Each time you turn on the
switch, the time and date will be reset to 2000-1-1 0:0.
Time Server IP
Address
Enter the IP address (or URL if you configure a domain name server in the IP Setup
screen) of your timeserver. The switch searches for the timeserver for up to 60
seconds. If you select a timeserver that is unreachable, then this screen will appear
locked for 60 seconds. Please wait.
Current Time This field displays the time you open this menu (or refresh the menu).
New Time
(hh:min:ss)
Enter the new time in hour, minute and second format. The new time then appears
in the Current Time field after you click Apply.
Current Date This field displays the date you open this menu.
New Date (yyyy-
mm-dd)
Enter the new date in year, month and day format. The new date then appears in
the Current Date field after you click Apply.