Zanussi ZCE 5000 - Manual (Page 32)

32
If the door glass panel becomes
chipped or has deep scratches the
glass will be weakened and must be
replaced to prevent the possibility
of the panel shattering. Please
contact your local Service Force
Centre who will be pleased to
advise further.
To replace the outer glass
1. Holding the oven glass with both hands,
gently place the locators into the holes
of the brackets at the bottom of the
oven door.
2. Push the top of the oven glass towards
the oven door, ensuring the screw
location holes line up.
3. Hold the glass in place with one hand
and insert the cross head screws into
the location holes with the other hand.
Give the screws one turn to ensure the
glass is secure.
4. Tighten the screws positively with a
Pozidrive screwdriver before closing the
oven door.
Do not attempt to use the oven
without the glass being in place.
To clean the inner glass door
panels
Clean the inner glass door panels using a
soft cloth and hot water to which a little
washing up liquid has been added. If the
inner panel is heavily soiled, Hob Brite may
be used. Do not use abrasive cleaning
materials on the door glass. Ensure that all
parts are well rinsed and thoroughly dried
before attempting to replace the glass.