Zap ELECTRIC SCOOTER - Manual (Page 5)

OPERATIONS AND FEATURES
PERFORMANCE AND RANGE
•
You will get the best performance on smooth and flat terrain. Give
the ZAPPY a push and pull the safety switch to start. Kicking the
ground with your foot while the motor is activated will increase
your speed and range. The more kicking you do, the more range
you will get from the ZAPPY. Remember to charge the ZAPPY
after every ride, no matter how short! Do not ever leave the
battery in a discharged state overnight.
SPEED SELECTION
•
Your ZAPPY is equipped with an electronic speed controller. The
motor can assist you up to 13 miles per hour. Your actual speed
depends on a number of variables such as rider weight, tire pres-
sure, incline angle, wind resistance, etc.
SAFETY SWITCH
• (Fig.1) For safety, the
ZAPPY uses a spring-loaded
switch. When released, it will
return to the off position. Pulling
the switch towards you while
pushing the ZAPPY activates
the motor. The switch can be
activated with the index finger of
the right hand.
MAIN POWER SWITCH
• The main power switch is a black button
located on the underside of the ZAPPY.
Power to the system can be turned either
on or off by pushing the button until it
clicks.
BATTERY POWER CONNECTOR
•
The battery onboard the ZAPPY supplies power to the motor via
the battery power connector. The battery power connector is
located underneath the deck and attached to the battery. For the
greatest safety, disconnect this connector whenever the
ZAPPY is shipped or stored.
CHARGE BATTERY AFTER EVERY USE! 4
Fig.1
OFF
ON