ZyXEL Communications ZyXEL ZyWALL IDP 10 User Manual
Page 36
Advertising
ZyWALL IDP 10 User’s Guide
4-4
Interface
Screens
Figure 4-4 Interface: Policy Check
The following table describes the fields in this screen.
Table 4-3 Interface: Policy Check
LABEL
DESCRIPTION
Policy Check Setup
WAN Port
Select ON to have the ZyWALL check traffic coming into the WAN and out through the
LAN against the ZyWALL policy rules (both pre-defined and user-defined).
LAN Port
Select ON to have the ZyWALL check traffic coming into the LAN and out through the
WAN against the ZyWALL policy rules (both pre-defined and user-defined).
Apply
Click this button to save your changes back to the ZyWALL.
Reset
Click this button to begin configuring this screen afresh.
Advertising