Xerox XM3-19w User Manual
Page 15
Installation
14
Xerox© LCD Monitor User’s Manual
5
Press the button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
6
When the DVI and VGA input ports are connected at the same time,
press down the AUTO button for 3 seconds to switch between the
VGA mode and DVI mode.
Connect to power source
4
2
Connect to the DVI port
Connect to the out port
3
1 D-SUB+1 DVI
NOTE:
HDCP has been implemented across the DVI interface. The HDCP
specification provides a cost-effective and transparent method for receiving
the highest quality digital entertainment content from HDMI compliant video
sources. (Specified for DVI models)