Zanussi ZSF 6120 - Manual (Page 4)

Function push buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- the setting of the water softener,
- deactivation/activation of the dosage of rinse aid,
- the cancelling of a programme in progress.
Programme selection push buttons: the selection of
a washing programme occurs by pressing one of these push
buttons (see "Washing programmes" chart).
Indicator lights: have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
Phase indicator lights: have the following meanings:
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
Description of the appliance
The control panel
4
1. Upper basket stop
2. Water hardness switch
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Worktop
IN144
Salt refilling indicator light: illuminates when the salt
has run out.
Rinse aid refilling indicator light: illuminates when
the rinse aid has run out.
Wash: illuminates when the washing and rinsing
phases are running.
Drying: illuminates when the drying phase is
running.
End of cycle: illuminates when the washing
programme has ended.
It also has added functions of visual signalling as:
- the setting of the water softener,
- deactivation/activation of the dosage of rinse aid,
- intervention of an alarm due to the malfunction of
the machine.