Yamaha DSP-AX2 EN - Manual (Page 7)

English
5
q TREBLE
Adjusts the high frequency response for the left and right Main
channels. Turn the control to the right to increase the high
frequency response.
w REC OUT
Selects the source you want to direct to the audio/video
recorder.
e EFFECT
Switches the effect speakers (Center, Front Effect, Rear and
Rear Center) on and off. If you turn off the output of these
speakers using
EFFECT , all DTS and Dolby Digital audio
signals are directed to the Main left and right channels except
for the LFE channel.
r 6CH INPUT
Switches between 6CH INPUT mode and normal input modes.
6CH INPUT mode takes priority over the source selected with
the
INPUT selector. You cannot use DSP sound field programs
while using an external decoder.
t VIDEO AUX
Inputs audio and video signals from a portable external source
such as a video camera. To reproduce source signals from these
jacks, select V-AUX as the input source. To direct this source
to the
VCR 1 and VCR 2/DVR output jacks, select VIDEO
AUX using REC OUT .
y DSP PROGRAM selector
Selects the DSP program.
Display Indicators
1
Processor indicators
When any function of DTS/VIRTUAL/Dolby Digital/Dolby
PROLOGIC/DSP/Dolby Digital Matrix 6.1/DTS ES is
operating, its indicator lights up.
2
PCM
Lights up when this unit is reproducing PCM (Pulse Code
Modulation) digital audio signals.
3
SPEAKERS A/B
Lights up according to which set of Main speakers is selected.
Both indicators light up when both sets of speakers are selected.
4
Headphones
Lights up when headphones are connected.
5
Multi-information display
Shows the current DSP program and other information when
adjusting or changing settings.
6
Input source
Shows the current input source with the arrow-shaped cursor.
7
BASS
Lights up while the BASS EXTENSION is on.
8
SLEEP
Lights up while the Sleep Timer is on.
9
P. DIRECT
Lights up while the PROCESSOR DIRECT is on.
0
STEREO
Lights up when the AUTO tuning indicator is on and the unit is
receiving a strong signal for an FM stereo broadcast.
q
MEMORY
Flashes to show a station can be saved.
Controls and Functions