ZyXEL Communications 2602HW-C User Manual
Page 7
Prestige 2602HW Series Quick Start Guide
7
3 The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From
the Network Address Translation drop-down list box, select SUA Only if you have one public IP address,
Full Feature if you have more than one public IP address (for translation) or None to disable NAT.
Note: You will only see the next two screens in Routing mode.
4 Fill in the fields with information from your voice service provider. Leave the default settings in fields for
which no information was provided (except if otherwise specified).
Note: You should have a voice account already set up.
This screen configures SIP account 1. Use the VoIP screens to configure SIP account 2.
• PPPoE
Select Connect
on Demand
when you don't
want the
connection up
all the time and
specify an idle
time-out period
(in seconds) in
the Max. Idle
Timeout field.
Select Nailed-
Up Connection when you want your connection up all
the time. The Prestige will try to bring up the
connection automatically if it is disconnected.
• ENET
ENCAP
• PPPoA
• RFC1483