ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 44)

Chapter 2 Introducing the Web Configurator
P-2302HWUDL-P1 Series User’s Guide
44
NAT General Use this screen to enable and disable NAT features.
Port Forwarding Use this screen to forward traffic to specific IP addresses based on the
destination port.
Trigger Port Use this screen to change your ZyXEL Device’s trigger port settings.
ALG Use this screen to enable and disable the ZyXEL Device’s ALG.
VoIP
SIP SIP Settings Use this screen to configure your ZyXEL Device’s Voice over IP settings.
QoS Use this screen to configure your ZyXEL Device’s Quality of Service
settings.
Phone Analog Phone Use this screen to set up which SIP accounts use which phone ports for
incoming and outgoing calls.
DECT Phone Use to enable your DECT phone base station and set up a secure
password DECT phone registration.
Common Use this screen to configure general phone port settings.
Region Use this screen to set up regional and call service settings.
Phone Book Incoming Call
Policy
Use this screen to set up call forwarding rules.
Speed Dial Use this screen to configure speed dial numbers for SIP phone numbers.
PSTN Line General Use this screen to configure your ZyXEL Device’s settings for PSTN calls.
Trunking General Use this screen to enable trunking on your ZyXEL Device.
Peer Call Use this screen to configure peer device authentication for trunking calls.
Call Rule Use this screen to configure forwarding rules on your ZyXEL Device for
trunking calls.
Security
Firewall General Use this screen to activate/deactivate the firewall and log packets related to
firewall rules.
Services Use this screen to enable service blocking (LAN to WAN firewall rules).
Content Filter Filter Use this screen to block sites containing certain keywords in the URL.
Schedule Use this screen to set the days and times for the ZyXEL Device to perform
content filtering
Management
Static Route IP Static Route Use this screen to configure IP static routes.
Bandwidth
MGMT
Summary Use this screen to enable bandwidth management on an interface and set
the maximum allowed bandwidth and scheduler for the interface.
Class Setup Use this screen to define bandwidth classes.
Monitor Use this screen to view bandwidth class statistics.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION