Yard Machines E645E - Manual (Page 5)

5
SECTION 2: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in parentheses. (Hard-
ware pack may contain extra items which are not used on your unit.)
A
ATTACHING THE HANDLES
B
ATTACHING THE HANDLE PANEL
D
ATTACHING THE CLUTCH CABLES
(2) Hex Nuts
(712-0121)
(2) “Z” Fitting
(746-0778)
E
ATTACHING THE CHUTE ASSEMBLY
(6) Hex Lock Nuts
(712-3027) (6) Hex Bolts
(710-3015)
(3) Chute Flange Keepers
(Not Shown) (731-0851)
F ATTACHING THE CHUTE DIRECTIONAL
ATTACHING THE SPEED SELECTOR PLATE
AND SHIFT LEVER C
(710-3015) (2) Hex Lock Nuts
(712-3027)
(4) Self-Tapping
Screws
(710-0599)
(2) Handle Tabs
(784-5599)
(2) Hex Bolts
(710-3180)
5/16-18 x 1-3/4” Long
(2) Hex Bolts
(710-3008)
5/16-18 x 3/4” Long
(4) Lock Washers
(736-0119)
5/16” I.D.
(2) Flat Washers
(736-0185)
(1) Hair Pin Clip
(714-0104)
(2)Hex Nut
(712-3010)
3/8” I.D. x 5/8” O.D.
5/16” Thread
(1) Cupped Washer
(736-0242)
5/16” I.D.
(2) Shear Bolts
(710-0890A)
(712-0429)
(2) Hex Lock Nuts
5/16” Thread
G AUGER SHEAR BOLTS (SPARES)
(4) Carriage Bolts
(710-0262)
5/16-18 x 1-1/2” Long
5/16” Thread
(4) Hex Nuts
(712-3010)
(4) Lock Washers
(736-0119)
5/16” I.D.
(2) Hex Bolts
CONTROL ASSEMBLY
1/4-20 x 3/4” lg.
1/4” Thread
1/4-20 x 1/2” Lg.
#10-24 Thread
1/4-20 x 3/4” Lg.
1/4” Thread