Technical specification, Installation – Zanussi ZVR11R User Manual

Page 15

Advertising
background image

15

Zanussi 818 15 02--02/5

Technical specification

GB

model

ZVR11R

net volume

293 l

width

595 mm

height

1800 mm

depth

600 mm

energy consumption

431 kWh/year

energy class

B

rated power

120 W

weight

72 kg

freezing capacity

28 kg/24 hours

number of compressors

1

Installation

GB

Unpacking

Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling.

Do not allow children to play with the
packaging. The plastic film can cause

suffocation.

Cleaning

Wash the inside of the cabinet using lukewarm water
and bicarbonate of soda (5 ml to 0,5 litre of water).

Installing the cabinet

To obtain the best performance from the cabinet,
ensure :

·

the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.

·

the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.

·

the room in which the cabinet is placed
has a temperature of +10

C to +32C.

·

the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the
feet using the supplied adjustment spanner.

·

there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet and any
grocery/top cabinet must be at least 200 cm².
The ventilation space can either be

a) directly above the cabinet, or
b) behind and above the top cabinet. In this case,

the space behind the cabinet must be at least
50 mm deep.

50mm

a)

b)

If the cabinet is placed in a corner and the side with
the hinges faces the wall, the distance between the
wall and the cabinet must be at least 10 mm to allow
the door to open enough so that the shelves can be
removed.

Advertising