Yamaha EN Keyboard - Manual (Page 63)

Basic Operation
DGX-620/520, YPG-625/525 Owner’s Manual
63
2
Use the dial to select an item or value
When you select a basic function, the item corresponding to that function will be listed in the display.
You can then use the dial or the number buttons [0]–[9] to select the desired item.
■Changing Values
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3
Start a function.
This is the [START/STOP] button.
Press the [START/STOP] button after pressing the [SONG] or [STYLE]
button to start playback of the selected song or style (rhythm).
The currently selected item is high-
lighted in the display. In this example the
[VOICE] button has been pressed.
● Dial
Rotate the dial clockwise to
increase the value of the selected
item, or counterclockwise to
decrease it’s value. Rotate the dial
continuously to continuously
increase or decrease the value.
● [+] and [-] Buttons
Press the [+] button briefly to incre-
ment the value by 1, or press the [-]
button briefly to decrement the
value by 1. Press and hold either
button to continuously increment or
decrement the value in the corre-
sponding direction.
● Number Buttons [0]–[9]
The number buttons can be used to directly enter a song num-
ber or parameter value.
Hundreds or tens digits that are “0” can be omitted (see
below).
Decrease Increase
Press briefly
to decre-
ment. Press briefly
to incre-
ment.
Example: Song number “003”
can be entered in three ways.
• [0] → [0] → [3]
• [0] → [3]
(“003” will appear on the dis-
play after a brief delay)
• [3]
(“003” will appear on the dis-
play after a brief delay)
Press number buttons
[0], [0], [3].
● CATEGORY [ ] and [ ]
buttons
When selecting a song, style, or voice,
you can use these buttons to jump to the
first item in the next or previous cate-
gory.
The CATEGORY [ ] and [ ] buttons are useful for select-
ing categorized items, as in the example below.
Example: VOICE SELECT Display
In a display in which a category appears, selection is easy if
you first use the CATEGORY [
] and [ ] buttons to select
the category containing the desired item, then use the dial or
[+] and [-] buttons to select the item. This can be particularly
handy when you have to select from a large number of voices.
f r
Jump to the first item
in the next or previ-
ous category.
f r
The first voice in the selected
category is selected.
Select the category shown
here.
CATEGORY button [ ] mark. r
CATEGORY button [ ] mark. f
f r
In most procedures described throughout this owner’s
manual the dial is recommended for selection simply
because it is the easiest and most intuitive selection
method. Please note however, that most items or values
that can be selected using the dial can also be selected
using the [+] and [-] buttons.