Error messages – Toshiba Pocket PC e740 User Manual

Page 138

Advertising
background image

Bluetooth Settings Help

User's Manual

9-25

TOSHIBA Pocket PC e740

Version

1

Last Saved on 10/05/2002 21:02

ENGLISH using Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK

Error Messages

Follow the suggested solutions below when these error messages are
displayed.

An error occurred with the Bluetoothmodule. Confirm that the card is
working properly.

Cause

There was an error when loading the driver.

Solution

Turn the Wireless Communication Switch off and on again.

The power is turned off or there is an error with the Bluetooth
module. Confirm that the module is working properly.

Cause

The power of the Toshiba Pocket PC is off.

Solution

Turn on the power of the Toshiba Pocket PC and then tap
OK

on the screen. Bluetooth Setting has ended. Reset the

system to restart the program

Cause

A different type of malfunction has occurred.

Solution

Reset the Toshiba Pocket PC.

Unable to retrieve local device information.

Solution

Restart Bluetooth Settings or reset the Toshiba Pocket PC.

Unable to retrieve local device information due to insufficient
memory. Check the amount of available memory.

Solution

Increase the amount of available memory and then restart
Bluetooth Settings.

Remote device search failed due to insufficient memory. Check the
amount of available memory.

Solution

Increase the amount of available memory and then try the
remote device search again.

Unable to retrieve remote device information.

Solution

Display the remote device list again or try the remote
device search again. If, after trying this, the same message
appears, restart Bluetooth Settings or reset the Toshiba
Pocket PC.

Unable to update remote device information.

Solution

Depending on communication conditions, the local device
may not be able to locate the service of the remote device.
Try the remote device search again. If, after trying this, the
same message appears, restart Bluetooth Settings or reset
the Toshiba Pocket PC.

The maximum number of remote devices (255) has been exceeded.
Delete all unneeded remote devices.

Solution

Delete unneeded ghost devices and try the remote device
search again. If more than 255 devices are discovered,
some devices will not be displayed.

Advertising
This manual is related to the following products: