XM Satellite Radio Portable Satellite Radio - Manual (Page 11)

Basic Operations
Turning SKYFi on and off
Press on the SKYFi Receiver or SKYFi
Remote Control. When first turned on, the
receiver will automatically tune in to the
last channel listened to and recall the previous
settings.
Please turn off SKYFi and wait for the screen
to go blank before removing it from the home
stand or car cradle. This will ensure that all of
the current settings are saved.
Basic channel selection
SKYFi allows you to select a channel by directly
entering its number, using a preset key, or by
tuning up or down to reach the channel.
Select a channel by number
1. Verify that SKYFi is in DIRECT entry mode.
DIRECT should appear in the upper right
corner of the display. If A or B appears,
press until the display says DIRECT.
2. Enter channel number using the number
keys.
7
Section 3