Xantech PA435X User Manual
Page 4
Advertising
Page 4
Model PA435X
© 2003 Xantech Corporation
Peak/Clip LED Indication: Whenever either amplifier channel output starts to enter a clipping state, a front panel
LED will illuminate RED. After the amp stops clipping the LED will return to its normal state 5-6 seconds after clipping
stops.
Auto Protection Circuit. This feature protects the PA435X if a short or very low impedance is detected at the
speaker terminals with each amplifier pair protected separately. Normal operation is restored automatically within 3 to
4 seconds after the short is removed.
Advertising