Zap DX - Manual (Page 15)

9. Do not disassemble the charger. The charger is not
serviceable; disassembly may result in a risk of electric
shock or fire.
10. To reduce the risk of electric shock, unplug the charger
from the outlet before attempting any cleaning of the
charger.
11. Do not use charger outdoors in wet conditions.
12. Charge in a well-ventilated area away from sparks,
flames and smoking areas.
13. For optimum performance, your ZAP Power System
should be charged in a location where the temperature
is more than 50° F (10° C) but less than 100° F (37° C).
(See “Battery Care on page 14.)
OPERATIONAL SAFETY WARNINGS
1. Keep hands, face, feet, and long hair
away from all moving parts.
2. Do not attempt to touch the motor while it is rotating.
3. Always remain alert. To prevent injury to yourself and
to others, do not operate your ZAP Power System if you
are fatigued or on medication.
4. Do not operate your ZAP Power System while under the
influence of drugs, alcohol, or medication.
5. Some states require that all bicycle riders wear a
safety helmet. It is recommended that this precaution
be followed at all times for maximum safety protection.
6. Never ride at night without functioning rear and front
lights, and all safety reflectors on your bike.
7. Be sure all wire connections, especially all battery
connections, are tight.
8. Follow all federal, state, and local laws regarding
electric bicycles.
OTHER SAFETY WARNINGS
1. Keep your ZAP Power System in good
working condition. Only your authorized
service dealer should perform any repair or
maintenance procedures that are not
described in this manual. Call (707) 824-4150 for your near-
est dealer.
2. Use only original equipment manufacturer’s
replacement parts when servicing this ZAP Power
System. These parts are available from your
authorized service dealer. The use of non-standard
parts, or other accessories or attachments not designed
for this ZAP Power System, could result in serious injury
to the user and/or damage to the ZAP Power System.
3. STORE UNIT INDOORS - When not in use, the ZAP
Power System should be stored In a cool, dry place -
out of reach of children.
4. IMPORTANT! Before storing or ship-
ping your ZAP Power System be sure
to disconnect your Battery Power
Connector. Remove your battery from
the bicycle and store it in a
FULLY
CHARGED CONDITION and away from any objects
that may short the battery terminals or Battery Power
Connector.
IT IS EXTREMELY IMPORTANT THAT YOU FOLLOW
THE SAFETY GUIDELINES CONTAINED IN THIS MANU-
AL IN ORDER TO INSURE MAXIMUM SAFETY. FAILURE
TO COMPLY WITH THE STANDARDS OUTLINED IN
THIS MANUAL COULD RESULT IN FIRE AND/OR SERI-
OUS INJURY. ZAP POWER SYSTEMS (ZAP) IS NOT IN
ANY WAY RESPONSIBLE OR LIABLE FOR ANY DAM-
AGE OR INJURIES CAUSED BY UNSAFE OR FAULTY
REPAIRS. ANY REPAIRS MADE TO THIS PRODUCT BY
UNAUTHORIZED SERVICE TECHNICIANS ARE THE
SOLE RESPONSIBILITY OF THE OWNER.
SAFETY WARNINGS
CONTINUED
13