ZyXEL Communications Prestige 28641 - Manual (Page 116)

102 Filter Configuration
•
Yes - filter match only established TCP connections.
•
No - filter match both initial and established TCP connections.
13. More - In this field, you can determine if you want to pass the
packet through the next filter rule before an action is taken. There
are two options for this field:
•
Yes.
•
No.
If More is Yes, then Action Matched and Action Not Matched will
be N/A.
14. Log - In this field, you can determine if you wish to log the results of
packets attempting to pass the filter rule. These results will be
displayed on the System Log (see Chapter 14). There are 4 options
for this field:
•
None - No packets will be logged.
•
Action Matched - Only packets that match the rule parameters
will be logged.
•
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
•
Both - All packets will be logged.
15. Action Matched - If the conditions for the filter rule are met, you
can specify what to do with the packet. There are three options for
this field:
•
Check Next Rule.
•
Forward.
•
Drop.
16. Action Not Matched - If the conditions for the filter rule are not
met, you can specify what to do with the packet. There are three
options for this field: